Jeffyone
New Member
removed all head bolts,drown it in WD40,knocked the side with wood block and 3lb hammer but still can't loosen and remove it.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Dread Head
- Thread starter Jeffyone
- Start date
Will L.
Well-Known Member
Can you post a pic or 3 of it from different angles?
Maybe we can see something.
Count of head bolts removed?
Intake, exhaust, crossover all removed?
Front brackets removed?
Grounding straps?
Passanger side head and automatic tranny dipstick?
Ive had some old heads that were a bear to pop off, but better to get some new set of eyes on it before chancing breaking something.
Maybe we can see something.
Count of head bolts removed?
Intake, exhaust, crossover all removed?
Front brackets removed?
Grounding straps?
Passanger side head and automatic tranny dipstick?
Ive had some old heads that were a bear to pop off, but better to get some new set of eyes on it before chancing breaking something.
Jeffyone
New Member
Thanks for the reply but the head came off today and I was happy till I saw the cracked piston.Junk time,not getting into the bottom end with 325,000 plus
Will L.
Well-Known Member
Ahh, bearly getting broke in...
Ok, over 325 I can't blame you. Whats the plan from here, military take out, new optimizer or?
Ok, over 325 I can't blame you. Whats the plan from here, military take out, new optimizer or?