Hi, I'm having an issue with white smoke all the time. Smoke smells like unburnt diesel
2000. Gmc 6.5td. 61k miles.
Changed all injectors with new bosch.
Checked rocker buttons.
It had 1 bad lifter when I bought it, wasn't able to see it run before I bought it.
I Was able to replace it with out taking off the head.
Fuel filter is clean.
New intake gasket.
New ECS.
It fires right up and Idles perfectly.
It cranks like it has good compression.
Number 6 and 8 cylinder don't have much change when cracking the injector lines.
It sat for awhile before I purchased it.
It sounds fine when running,just smokes even at higher RPM, and up to temp, no miss fires.
I was going to do a compression test, I started taking out out the glow plug got the first 2 out in no time numbers 2 and 4, got to number 6 and 8 and I can't get them out, 2 hrs later. They un thread but I can't pull them out, they must be swollen inside .I ordered a tool to remove them and new glow plugs from Leeroy diesel. Any Idea if bad swollen or cracked glow plugs could leak compression,causing low compression? Just a thought. Thanks mike
2000. Gmc 6.5td. 61k miles.
Changed all injectors with new bosch.
Checked rocker buttons.
It had 1 bad lifter when I bought it, wasn't able to see it run before I bought it.
I Was able to replace it with out taking off the head.
Fuel filter is clean.
New intake gasket.
New ECS.
It fires right up and Idles perfectly.
It cranks like it has good compression.
Number 6 and 8 cylinder don't have much change when cracking the injector lines.
It sat for awhile before I purchased it.
It sounds fine when running,just smokes even at higher RPM, and up to temp, no miss fires.
I was going to do a compression test, I started taking out out the glow plug got the first 2 out in no time numbers 2 and 4, got to number 6 and 8 and I can't get them out, 2 hrs later. They un thread but I can't pull them out, they must be swollen inside .I ordered a tool to remove them and new glow plugs from Leeroy diesel. Any Idea if bad swollen or cracked glow plugs could leak compression,causing low compression? Just a thought. Thanks mike