btfarm
America First!
Jet Hot?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Ceramic coating FACTS for the DIY'er
- Thread starter Twisted Steel Performance
- Start date
ak diesel driver
6.5 driver
To tell the truth I can't remember. It was in the early 90s. Jet hot sounds familiar though.
n8in8or
I never met a project I didn’t like
Thanks for all the info and links Chris. I will be checking out all the info on that website. I don't know that I'll do anything with it anytime soon, but I'm sure it will come in handy some day. Thanks again for sharing knowledge you have invested considerable time and money into gathering. 
Will L.
Well-Known Member
Looks like I may be doing this sooner than planned.
My balancer just took a dive, and I have a bunch of other parts just waiting to get installed. Think I am going to pull the engine and refresh it, and do all the new parts at the same time. If I am going to keep the thing I might as well do it all right while I am there, or just do it back to stock and sell it.
My balancer just took a dive, and I have a bunch of other parts just waiting to get installed. Think I am going to pull the engine and refresh it, and do all the new parts at the same time. If I am going to keep the thing I might as well do it all right while I am there, or just do it back to stock and sell it.
Sounds like a good time to start to me...
n8in8or
I never met a project I didn’t like
Boo and yay?
Will L.
Well-Known Member
Idk, we'll see.
NVW
Well-Known Member
Will, if you just need to get it running I have a used balancer you can have. The rubber is decent.
Will L.
Well-Known Member
Thanks but no. rather go new on that part unless there is a used fluidamper out there somewhere cheap haha.
Just so everyone knows there are kits available with the coating product needed to coat a v8 motor, not to coat everything but a started kit .....