matuva
Tropical 6.5er
A fresh rebuilt engine is turning us mad :
new crank, new main & rod bearings, new piston rings... new strong fast spinning starter and good lift pump
Put piston # 1 on top dead center, align the marks on crank sprocket and camshat sprocket, rotate 180° and align IP, new CPS, good glow plugs...
We bleed the engine, plenty of fuel arrive at the cylinders...
Glow, crank, lot of black smoke (not white, black), but no start sometimes some hiccups like if she was going to fire, but then, nothing... :mad2:
before we light a match in this thing, anybody has a suggestion ?
new crank, new main & rod bearings, new piston rings... new strong fast spinning starter and good lift pump
Put piston # 1 on top dead center, align the marks on crank sprocket and camshat sprocket, rotate 180° and align IP, new CPS, good glow plugs...
We bleed the engine, plenty of fuel arrive at the cylinders...
Glow, crank, lot of black smoke (not white, black), but no start sometimes some hiccups like if she was going to fire, but then, nothing... :mad2:
before we light a match in this thing, anybody has a suggestion ?