• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

95 gasser temp sensor.

ak diesel driver

ak diesel driver

6.5 driver
Messages
19,951
Reaction score
21,428
Location
alaska
Posted this here to get the most views/response. Helping a friend with his 95 k2500 454 truck. Has 2 temp sensors one on driver's side for the gauge one on pass side for the ECM. So the pass side sensor is broken barely all there. We cannot find the sensor that fits the plug. I've gone through all the sensors on RA and none of the pic's show the correct one. Any ideas on where to look for one??422d40c5-0756-4233-80e5-3a4d747e6317.jpg
All the one wire ones have kind of a mushroom shape instead of the rounded sides like in the pic.
 
I don't know if the 98 is different I will go down and look at my truck in a few minutes. And see if the sensor is different and if I can get any numbers off of it. If my memory serves right. I think my temperature sensors are on passenger side and at the water neck up in the front of the valley but I will double check in a little bit.
 
You must log in or register to reply here.
Back
Top