NVW
Well-Known Member
Nice work, they'll likely outlast the cheap factory ones.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
94 Explorer
- Thread starter trouttrooper
- Start date
tanman_2006
Just a farm kid...
Should have gone with stained! Real wood trim finish! Lol
Looks fine to me. I've seen worse.
My 93 has 1" angle iron bolted in its pull handles.
Looks fine to me. I've seen worse.
My 93 has 1" angle iron bolted in its pull handles.
trouttrooper
Big Blocks ROCK!!!
My goodness, time flies. So the latest with the explorer. Figured out the engine shake about a month ago. It always helps when a V-6 is actually using all 6 cylinders. It's been a V-5 for who knows how long. New ignition module, spark plugs/wires and this thing is running smooooooth. Gee, can you tell which plug had not been firing??
I also tracked down why the AC was inoperative. Cracked line on the evaporator core, most likely from the engine shaking so much. So new core, accumulator, orifice tube, lower return hose, and o-rings. This thing can freeze me out now with it being 98 degrees outside!!! Not the most difficult job removing the blower assembly, but I'd rather not do it again.
And the icing on the cake this weekend. Went to the junkyard to get a new turn signal arm and saw a recent addition '93 Explorer to the lot that had a center console with cupholders!!!! If you scroll up to my other pics you'll note my explorer had a 60/40 front seat with no cupholders. Booo. Well, Not anymore! Center console and drivers seat out of the '93, armrest and lid for the center console out of a '95. Drill a few holes to mount the brackets and TADA!!
I also tracked down why the AC was inoperative. Cracked line on the evaporator core, most likely from the engine shaking so much. So new core, accumulator, orifice tube, lower return hose, and o-rings. This thing can freeze me out now with it being 98 degrees outside!!! Not the most difficult job removing the blower assembly, but I'd rather not do it again.
And the icing on the cake this weekend. Went to the junkyard to get a new turn signal arm and saw a recent addition '93 Explorer to the lot that had a center console with cupholders!!!! If you scroll up to my other pics you'll note my explorer had a 60/40 front seat with no cupholders. Booo. Well, Not anymore! Center console and drivers seat out of the '93, armrest and lid for the center console out of a '95. Drill a few holes to mount the brackets and TADA!!