Iron cowboy
New Member
- Messages
- 2
- Reaction score
- 2
Looking to get some info. Want to know if a rear bumper from a 99 model Chevy will bolt up to an 88-98 Chevy. Looking to see if the frame is the same width or close to each other
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
88-98 Chevy frame
- Thread starter Iron cowboy
- Start date
Will L.
Well-Known Member
99 was the change over year from gmt400 to gmt800 body styles and both bodies could be bought that year.
If the body style is the same- then yes. But there were some bumper bracket changes so you might need the brackets also. If it is the newer style like went into the 2000 years- I don’t think it will work without some fabrication.
Welcome to the forum btw.
If the body style is the same- then yes. But there were some bumper bracket changes so you might need the brackets also. If it is the newer style like went into the 2000 years- I don’t think it will work without some fabrication.
Welcome to the forum btw.
Iron cowboy
New Member
- Messages
- 2
- Reaction score
- 2
Thank you very much.
MrMarty51
Well-Known Member
Body components from the 88 to 99 years fits on My 2000 K3500 CC.
Headlamps on Mine is from an 88 1500 series and the tail gate is from a 94.
Headlamps on Mine is from an 88 1500 series and the tail gate is from a 94.