6.5 running like crap after new IP install

[JonnyTheKidd]

so i replaced my injection pump. I'm new to diesels. i got the timing close 2.9-3.5. but it is running like crap i bled everything the filter, return lines, injector lines cracked them 1 by 1. the truck was running fine with the old injection pump it was just leaking fuel and filling the valley. i took the new one off putt the old one back on with the marks i made lined up and ran the same as it did with the new one. in park it idles high around 1500rpm and wont come down even after it warms up. if i put it in drive it will even out and not sound so choppy but still sits around 1000rpm. it also gives itself short revs. here's a link to a video of it running, help would be awesome cause I'm lost as to why its running like this.

link to truck running

like to the Actual IP timing not sure if i should advance it more or retard it more


thanks in advance for any and all help!!

 

[ak diesel driver]

so you do realize the timing number should have a - in front of it. Also I didn't see a TDCO number which is the main thing you're looking at. What year truck?

 

[jrsavoie]

Where did you get the IP?

 

[jrsavoie]

i got it for dales diesel store

Never heard of them

 

[JonnyTheKidd]

so you do realize the timing number should have a - in front of it. Also I didn't see a TDCO number which is the main thing you're looking at. What year truck?

ohh, alldata said i should set the actual IP timing to 3.5- 3.6 then do the TDC. its a 94 motor,DS4 injection pump. 98 truck

 

[JonnyTheKidd]

Where did you get the IP?

i got it for dales diesel store