5.7 diesel up and running

[Will L.]

In our testing we didn’t do any inline pumps that were smaller fitting size.
Factory is 3/8”.
Hope this works out for ya.

Please share date& mileage so others can learn longevity of it.
Giver her some uphill runs towing a descent load to see if the pressure stays in the happy zone.

 

[dieselolds]

Absolutely.I hope it works out also will.I used new 3/8 fuel line hose as the supply.I’ll take a picture of the Delphi lift pump and the fittings I used tomorrow.I like the way it runs though.Much better than before.I have a digital fuel pressure gauge I plan to use to monitor pressure under load,etc.

 

[dieselolds]

Here’s more information on this lift pump and the fittings I chose to use in the lower two pictures.

 

[jrsavoie]

In case anyone is wondering the Delphi FD0040 uses 1/4npt fittings on both the inlet and outlet.And it has no wiring connector on it.You’ll just have to buy one which isn’t a big deal.

Where is it made?