Killain
New Member
Can anyone tell me the size and length of a stock stain steel braided fuel intake and the bypass and runs back to the fuel tank ? I don't know the size of the fittings either.
Thank you !
Thank you !
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
1988 Chevy Blazer 5.7 V8 fuel lines ?
- Thread starter Killain
- Start date
- Staff
- #2
Don't know the exact lengths, but I do know they are in several sections. It's a 3/8" feed line and 5/16" return line. It uses some sort if compression with an o-ring seal. The engine is one section, theres a section from the tank to the filter, then from the filter up to the back of the engine. The lines were actually the same for all engines to the back of the engine(the diesel lines had a pump where the gas lines had a filter). Your best bet to find them will be a junk yard as the early tbi's used the braided lines whereas later models used just a steel hard line.
Killain
New Member
Thank you, Good info.