• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

cac/ic

  1. D

    Quesiton/ Opinions: LB7 Rad & CAC in GMT400 Core Support

    For an upcoming build, I'm hoping to incorporate a CAC (intercooer) by using the DMax first generation rad & cac in tandem in the K3500's core support. I've read on other forums about this mod being done before, so I'm hoping someone with firsthand experience can chime in with any helpful...
  2. F

    Sea water inside cylinders

    Well, I'm pulling out the injectors and glow plugs spinning the diesel to remove water in cylinder's. I was thinking about connecting my shop vac blower to the intake manifold and blow air through the diesel for say a few hours. I'm suspecting the CAC has a crack or something because of the...
  3. F

    Boost issue!

    Strange boost issue w/HX40w 18 cm2, normally starts to spool at 1.1k I have boost set to 30 psi (gauge) on a hot day it will boost a little less and on a cool day it would spike a little higher upon initial throttle to WOT there would be a very noticeable cloud of black smoke which would clear...
  4. F

    Those of you w/rear mounted turbo CAC/IC adapter

    Don't know if any of you seen this but I came upon it while researching rear turbo appplications of the 6.5. http://www.ecrater.com/p/21523856/gm-10238859-intercooler-adapter-for-65-l-rear-turbo?gps=1&id=74299256865
Back
Top