Search results

I blew my belt and its shredded.i cant find the old one or part number.since I eliminated the vacuum pump,its not stock.anyone have a belt number that will get me close..thx

thx for the reply..great fuel pressure new lift pump all the above..im gonna get a pmd..many gremlins come from them..im gonna get it from Leroy..i need to do the oil lines anyway thx again

morning folks..since I last posted my dually turned into "Christine"for some reason it turns off intermittently..i put an s&s pmd about a year ago..since then replaced the fuel solenoid cuz I thought it may be that. it will run perfectly then 2 seconds later it will shut off then may or may not...

thx for all the help..this truck has been the MOST dependable vehicle ive ever owned for the last six years.with this website and all of your help theres nothin I haven't been able to fix..however ...recently she turned into CHRISTINE...started blowin the big 30 amp ignition fuses out of...

got the blown fuse fixed...thx for all the help..it was a wire tucked behind the turbo..once again u guys bailed me out...anyway ive had a problem for a while with the heater/ac fan not blowin on high..now it goes off intermittently..i heard theres a small circuit board that controls it...or...

thx for the reply..my truck is a 95 gmc sierra ...I replaced the blown motor with a teds 506 about 4 yrs ago...the fuse that blows is the 40amp ign.A fuse and ur correct its not the glow plugs...upon further review the fuse doesn't pop til I hit the starter...im gonna go get some fuses and...

morning folks haven't posted in a while, but I know u guys will have an answer ...I pulled into my driveway the other day,trucks runningg great as always..went to leave wouldn't turn over. has new batts but still had nothing.i noticed that the volt meter didn't go up or headlights didn't dim...

i need the link to the archive about reading codes for my 95 odb 1. my computer crashed and i lost all my saved data..i got an 81 code and im trying to track it down...thx in advance for any and all replies:nonod:

drove the truck a few times with the new pedal assy...checked codes none...seems to have fixed the prob.kinda weird that u can have all those codes and never get a light.the more i learn the less i understand....thx for all the help.

i never got any ses codes but looking in the archives someone posted that u may not get any,thats why i pulled the codes. as it turns out all 4 codes were related to the accel pedal position. i recently replaced the pmd, so i was pretty sure it wasnt that(although ive also read there are many...

cruise is working now pulled the codes all 4 of them are accel position related.. i assume ill have to replace the pedal assy. are these readily available .is it a dealer item or heath maybe. open to suggestions thanks

Morning all. been out of the loop for a while..mostly work and the trucks been running great....until last nite. i was cruisin down the freeway on cruise when all of a sudden the cruise went off. whe i tried to pedal it...nothin. as i rolled to a stop i realize the engine was idling. i pushed...

yes ac delco. gonna change the harness and pmd, soon as it gets here..........prayin its not the ip. thanks for the help. ill let u know what happens asap.

ok , i replaced the lift pump and oil press switch within the last 500 miles . i can hear the lift pump so i know its working. the engine never stumbles , it just shuts off as if i turned the ignition off.

greetings folks i need your expertise once again. my duallys been running great since i got it running about a year ago.last week after i got done shopping,it wouldnt start. after a sec, it started,but died after 500 ft.i started it and drove for the next week or so.(i figured it was just the...

yes i checked all those things. they were all replaced when i put in the new motor. i removed the belt again and spun , and tugged, and pushed on all of them. they all spin good with no excessive play.there used to be a small whirring sound the first time i would hit the brakes backing out of...

yea mounts are good new vibration dampener/ pulley,water pump alt, flexplate, checked converter bolts, all good. if i remove the belt and restart it, its smooth thru the whole power band. im baffled. 11000 mi. on new engine.

hey folks been gone for a while. duallys runnin great , but i recently picked up an issue that seems to be connected to the power assist to the brakes. at idle i have a mean vibration thru the steering wheel and brake pedal. its between 700 and 1000 rpm once i take off its fine. i removed the...

thanks for all the replies, its a 95 and ive never seen any light other than the ses and the normal ones i will check the fuses and controller today also would it matter where the controller is mounted? cuz when i put the motor back in i didnt know where to mount it.as i stated b4 i towed this...