Search results

I want to try and lighten the amount of pressure the throttle pedal needs and was looking over everything, after our long trip the one thing I noticed is my left foot would feel like it was falling asleep over the amount of pressure I had to keep on the pedal. I used the cruise control most of...

Guys, my 93 has developed a noise that I need some help identifying. It's a high pitched banging noise that almost sounds like something to do with the flex plate. I double checked to make sure the front pulley and HB were doing ok, they both seem fine. I have a fear that ether the flex...

Guys, I wanted to ask the question since I am going to need to replace my steering box on my 95 truck. what is the better option that won't break a poor mans bank account for getting a good no so sloppy steering box? I would like to get a new one but not sure where to go or what brand is...

Guys, a quick and simple task but I need some help figuring out what bulbs I need. for the 93 HVAC control and window switches, they use some sort of very tiny bulb that has a twist in type socket. you have to use a small flat blade screwdriver to get them out. I can't seem to find what...

Good morning fellas, I have a question about my 93 truck and an odd noise the engine is randomly making. this has happened a couple of other times but I wasn't sure what it was. it happened to me again twice last night while running around town. The best I can describe it is when...

Guys, I was looking online today for door parts across different sites, since I was having intermittent issues with the drivers window not wanting to work I figured it wouldn't hurt to see if I could get a replacement switch for the drivers door since it's the one most used throughout the life...

I figured I would start a new thread here trying to get some good name ideas for both of my rigs. Now that I have two almost identical two wheel drive trucks I figured lets have some fun naming them.

Guys, since I have found the need to install a catch can on my truck, I have been looking at the CKO knock offs on the jungle site and noticed something. on the diagrams and photos, each one shows the outlet at the lower end of the housing. this got me to start thinking about gravity and the...

Hey guys, whats yall's recommendations on the outside window felt sweeps? both of the ones on the rear doors are still in tact but will not latch in place. I only found the front on the jungle site, figured I could cut them to fit, but figured I would pop the question here...

Hey guys, I figured I would start a new thread for this GV OD unit that was installed on this 93 truck. Now that I have the TCI TCU working properly I need to figure out how to get the "AutoDrive" portion of the GV unit to work. as it is now if I use the manual switch, the OD will kick in...

Hey guys, continuing on my 93 trying to restore it to as much as I can "Unmolested" stock setup. I need some help with the IP. the PO had installed a military IP that is 24v for the fuel shutoff solenoid. I have a 6.2 on the stand which has a DB2 of unknown condition. At some point I...

Hey guys. On the 93 truck I just bought, I have been diagnosing why it shifts hard from 1st to 2nd. I went through all the setting in the programmer and was viewing the live data when I realized that it's not getting an RPM signal. I traced the wires and see that the RPM module is...

Hey guys, since I have been able to drive this new to me 93 truck that has a DB2 pump, I have noticed that when driving the engine is LOUD! the clatter is what I would call extreme compared to my 95 but it's nice n quiet at idle. I was reading up on what might cause this and came across some...

Hey Fellas, I have been looking at youtube on this model truck at simple fixes that can be done to easily restore a cracked up dash rather than spending a bunch of money replacing it. On the 93 I just bought, the dash is badly cracked, mainly on the top areas and where the glove box latch...

Hey fellas, time is getting close for me to pull the jetta out of the yard and get the timing belt replaced. My son wants it running and driving reliably LOL. I went on an online searching spree this evening looking for all the procedures, do's and dont's. found some good write-ups on it...

Hey Guys, not sure if this would be the right place to post, but I need some help with getting my brake controller to work properly. I have a Tekonsha Voyager controller that was in the my truck when I bought it, it's as old as the truck is (date sticker has 1994) when I bought the truck the...

Good morning fellas, I know lots of you guys here on the forum have done hauling and are experienced, as for myself I have hauled lighter things but nothing heavy. I'm looking around for some advice on hauling a vehicle weighing about 8-10k with a truck about the same weight for about a...

Hey guys, I figured I'd start a thread here as I need some help and opinions on working the interior. I just replaced the dash after I finally got around to pulling it out of the garage, painting and installing. I had bought this dash off the face space back in January of 22. I really...

I was browsing the face space and ran across this…..

Just at the title says, I was digging though photos in my phone today and was looking at how my truck looked when I bought it in Feburary of 2020 and how things have changed on it. I also found one pic of when I had pulled the tool box and headache rack off and installed a camper top on the...