Search results

My 95 6.5 4x4 Suburban was running so good and then she just died going down the road. I’m familiar with the PDM shutting down but usually she would crank back up. Mine is the updated Leroy driver and it’s located behind the front license plate. This time she wouldn’t start back but would spin...

My oil cap on my 95 Suburban needs to be replaced. Does the new cap need to be vented or can I just pick up a regular cap from Autozone or somewhere?? Sent from my iPhone using Tapatalk

I cranked my 95 Suburban 6.5 this morning and the starter stuck. Turning the key off didn't stop it. After about 20 seconds it finally stopped. I'm guessing the solenoid on the starter ?? Im hope nothing else broke. Any ideas ??

I tried searching but couldn't find anything . I received my ops from Leroy but now I guess I need a socket. This is going on my 95 Suburban. Any suggestion on where to get the socket ?? Sent from my iPhone using Tapatalk

I took the 95 3/4 ton Suburban to the alignment shop today and the guy told me I needed new upper and lower ball joints on passenger side of vehicle. He quoted a price if $400 which is probably not bad but I just spent $900 on new tires. It looks like I can get the Moogs for about $32 each from...

I changed the fuel filter like I have 20 times before and now my 95 6.5 won't start. I ran probably a gallon of fuel through the air bleed on top of the filter already . I ran the batteries down pretty good and recharged both of them. I put the batteries back in and tried again and it hit a...

My Hydroboost was leaking bad on my 95 Suburban Diesel 4x4. After talking myself out of torching the truck while trying to remove the booster, I finally have it out. The new booster won't be here for a couple of days so now I guess I need to flush the power steering system. Can this be done with...

Last night about 10 minutes after I plugged in the coolant heater in the freeze plug,my son came in and told me my Suburban was sparking. Well of course no one has one here in Mississippi so I had to order one and it should be here in the morning. Anyway....the coolant drain-cock is stuck...

My wife's 2002 Trailblazer has a little speaker looking thing behind the Driver's seat. From searching the web,I've found out it is a "ambient temp sensor for the climate control system". There's a little fan that pulls inside air into the sensor and the fan seems to be running 24/7. Anyone ever...

I use my Suburban for towing my camper and I want to be able to bring along firewood for a campfire. My roof rack is not heavy enough for a "Safari rack" so that's not an option. I've been looking at front mounted receivers.I figure I can use my basket rack and carry plenty of firewood for a...

I just finished redoing my valve covers and of course I had to remove the fuel lines.Do I need to pull the glow plugs and turn over the engine to get the air out of the lines??

Is there a better wrench to remove flare nuts on lines on IP?? I'm redoing my valve covers AGAIN.I believe the wrench size is 3/4 standard or 19 metric.My regular wrench is a PITA.I looked for a flarenut wrench but can't seem to find one in the 3/4 or 19.Does anyone make a wrench that size??

About a month or so ago I had to replace the rockerarm retainers on the 6.5 and of course I redid the valve covers with "Ultra Black".They're leaking again and this time on to my exhaust.This has me a little worried.Everyone says not to use a ready-made gasket but is there one that would hold...

My AC is blowing cold air out of the defroster vent.It fogs up the outside of the windshield and drives me crazy.Any ideas???

I'm reading only 10.5 volts at the glow plugs.Batteries are good. What causes this??

Here's my original thread about my problem...http://www.thetruckstop.us/forum/showthread.php?t=24005 I found what I hope is my only problem.One of my little nylon Rocker arm retainers had broken off and allowed the push rod to come out of the rocker arm.The rod was just kinda sitting there...

The valve covers are leaking on my 6.5 and since I'm in the process of installing new injectors I figured this is a good time to tackle the valve covers too.My question is...will the injector lines flex enough to get the covers off or would it be easier to pull the intake and completely remove...

The top of my fuel sending unit had some kind of sealant on everything.It almost looks like plumber's putty.Is this from the factory or did some one have a problem with sealing the unit?

Before I completely tear something up,how the heck does the sending unit connector come off?? I'm removing the fuel tank on my Suburban and I have everything removed except that darn wire.:mad2::mad2:

About a month ago I had to replace the lift pump in my 95 Suburban in a O'Reilly's Auto Parts parking lot.It has ran fine ever since but on shutdown I have been hearing the lift pump miss a little and it almost sounds like the noise is at the engine instead of on the rail??? Well Friday I...