Search results

mine looked just like yours

drill out the hole, cant get that pic to upload, tap the hole with special tap install the insert, not the odd thread pitch almost like Velcro how they attach after insert is fully seated you drill small hole for the lock pin right through the threads so they cant back out the finished...

having troubles with the pics but the kit had to buy was like 300+ and you need a pretty big drill press to do it in or a mag drill

ill find the pics of how I fixed mine with the lock and stich full torque inserts

speaking of business Leroy can you get just a down pipe

I wasn't trying to send business away from you Leroy iv done plenty with you my self, I was just wondering if this was one of the less worth vendors that had changed there name to escape a bad history, there is one site that I can picture in my mind but I cannot remember the name of that did...

I knew there had to be a reason in 8 years I had never com across them

after looking around a little more all the pic of there engines and parts are ones that I have seen on ebay

http://www.6 - 5liter.com/ ***link deactivated: jifaire*** am in need of some new valve covers for the truck since the ones I put on when I did the rebuild are leaking (they where pretty bent up) so I was doing a quick search and I found this site, iv done a lot of looking on the internet and...

Got it started. i un hooked the batts and touched the + to the - on both sides hooked them back up (dont think this really helped but i did it) security light still stayed on. My mom ran my wife the 20 miles home from our cabin to get her suburban and my scan tool, while i stayed and helped my...

Hey guys been away for a while but I'm having trouble today. Started the truck about 10 last night parked it and now it won't restart cranks along time fires but won't run. Security light will NOT turn off so I'm thinking pass lock. Any help?

hey guys been awhile but i was talking to a guy the other day and he claims to have a shop that rebuilds ds4 pumps for him and they re-clock them 15* internally and get more fuel, iv been around these trucks for a while and didnt know there was a way to do this? What do you guys think?

Well i finally figured out the problem. All 4 actuators where bad. Also i had to rebuild the connector at the door lock relay, the terminals where bent so it was not making good connection. Napa had the terminals for $1 something each. I think that the poor connection may be what lead to the...

Do you need any more I maybe going back there this week

Are you still looking for ecms? There is a 99 in the junk yard here. Not sure what they want for it but what is a good price

rock auto has the best price on them and they have a 30 day return policy for full credit.

i unpluged the rear 2 and still no better guess i will order the actuators

i did a jumper wire to batt this evening and no change. im not sure i had that many ohm's any way because i checked it again and if i put the red lead in the plug and the black to ground i get nothing a first then high numbers but if i put black lead in plug and red to ground i get 0 ohm's. i...

Ok so back on this problem. Thought it was the relay tried that wasn't it. Thought it was keyless entry receiver, got one from junk yard same thing. Took all 4 door panels off and unhooked lock rods from actuators, they move but are very week. Im thinking it might be a bad ground because btwn...

as others have staded iv got like 20k on mine and they look really good still and as i said before they handle awsome on dry, wet, mud, snow, ice i would say that half my driving is on gravel roads and with tires in the past they have always chipped out from the rocks but these havent got a...