Search results

My son took over old faithful, on cool and cold mornings the truck will start with no problem even on the coldest days this past winter with out plugging in. The truck will start run for a few mins then die, then need to cycle the switch a couple times and will start right back up. After 3-4...

I was just wondering how the boost controller actually work. The connector shows having power, is that power coming from pcm? Does the pcm telling it to come on and off? Does the power shut off once it reaches boost. How does the vacuum work in relation to the boost controller? Soory for...

I know this may be a old subject, but I'm looking for info on doing a high idle on my 95 truck. I'm trying to find a part number for the wire pin that goes into the connector of the pcm. Any help would be appreciated. Thanks

Okay now I see why FTB is a good reason to do, so I must do it. Although I did not see the IP mod write up. Is the IP mod basically the same as on the FFM side? Thanks for the info, I email Peninsular for find out if they have them in stock. I have not heard back yet, I also need to get in...

Feed the beast mod? Does he carry the bio rated line also that you know of?

Leroy does carry the orings for the FFM's?

I believe it does still work and you have two good thoughts. I will look for a pin hole and I went on Peninsular web site and they have take offs for only $85.00. I think I will order one and just r&r the part instead of spending the time to reseal the one I have. Although I will keep it for...

Hey guys Im looking for a seal kit for the FFM's. I believe i have a leak at my FFM from the bottom side, check fuel lines to make sure they are tight. Has anyone here try to install reseal kit or is it better to get a another FFM. Any suggestions is greatly appreciated. P.S. I have seen a...

Again thank you to all of you and this great web forum........ David

I was was happy with the 523 bill because I have friend that is a diesel tech at a dealership he said it could cost 6-700 depending on the dealership. The may concern was getting my family home safe. I was more worried about that than myself or the truck. This duramax is still a learning...

It was for the part that is call out for the TSB 05-06-04-047c kit. The part number is 98017958 which consist of a kit which includes the new 90 degree connectors and splices etc.

I want to thank all, being stuck out of town is not fun. We were not in a good area that late at night, me and the family were at the Monster Energy Supercross in St Louis Mo. Back home safe now. Took the the truck to Lou Fusz Cheverolet in St Peters Mo. they comfirm that it did need the TSB...

I check the code we got, I had a typo it is a 1294. according to the TSb that code is included in the technical service bullentin that I found. (#05-06-04-047c). btfarm I walk over to the dealership and check for chaffing on the harness it was ok.

btfarm by chance do you know that TSB doc?

I will check that also, thanks btfarm. My truck currently at the dealership and I am not very close I will try to get over there. I had to send my family home in a rental car since tomorrow is a school day for them.

I will search the ice pick fix. Thank you Thefermanator.

Ok guys i need some advise, I have a 2005 duramax with 89,000 miles. No mods right now except for exhaust and guages. I am stuck in St Louis right now with a check light on, the truck is missing real bad and had a P1249. At this point in time I had it towed to Lou Fusz Chevrolet for monday to...

Thanks for all the info I have a whole new learning curve of maint. with this. But now I found out my son wants to keep the 6.5 in the family so he can drive it next year when he is old enough. I will work on the pics after next week going to Texas for a little get away.

Well guys I switch to a duramax this week. Found a clean one owner 2005 1 ton dually crew cab 4x4 fully loaded with 73k. Question what are the 95 6.5td going for now days, my old one is 2wd crew cab, cloth interior, 194k miles, 3inch down pipe, 4 inch exhaust, leroy's pmd relocation kit...

Well clean and move some grounds and did a IP test according to Heath Diesel. Took it for another test drive seem ok until the truck had been running at normal temperature, then started to miss and finally stalled. Flash codes found 49,84,99. Contacted Heath Diesel and talk with Bill, with the...