• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. Will L.

    How do you all get 6.2s to 300K miles

    Yeah- some water beat up the differentials a tiny bit but nothing at all to worry over. As mentioned- make sure the breathers are cleaned up. & if you offroad half as much as that is rig deserves it, extend the breather hoses way up high. In hmmwvs they tie the two together then use a small...
  2. Will L.

    2003 Tahoe w/ 4.8 V8

    Depends if it is a short circuit or a battery draining component with or without key on. Basically measure amperage pulling from battery. Leave the meter in place and pull one fuse at a time. When amps drop- that That will id the circuit. Finding a short circuit- that isn’t fun. You...
  3. Will L.

    (((Notice))) AMG "Optimizer blocks" Made by Dalton foundry now.

    Yup. Some bone head told AM General & the military that 230,240f is ok for these engines and they blow through them like candy because of it. Meanwhile everyone else that know 220f means PULL OVER NOW & let it cool off- the engines make it a long life. There is other things to look at &...
  4. Will L.

    (((Notice))) AMG "Optimizer blocks" Made by Dalton foundry now.

    I can’t remember reading anywhere that showed the Dalton date code pattern. Maybe some calls or emails sent off could get results?
  5. Will L.

    Will a 1997 4L80e be compatible with my 91 7.4 454

    The 4l80e has minor changes year by year. DEFINITELY have yours rebuilt.
  6. Will L.

    (((Notice))) AMG "Optimizer blocks" Made by Dalton foundry now.

    Can you take a picture of where the date code usually is?
  7. Will L.

    Garage for Humster.

    I don’t know chimneys, but wouldn’t it be better to use two 45° fittings?
  8. Will L.

    Hard Start after some maintenance

    Remember a dab of anti-seize on the threads. In COLD weather a second cycle of the key is needed or the override switch. But the couple seconds are worth it. Hope you ordered from an authorized dealer. Lots of cko junk out there.
  9. Will L.

    1994 K3500 extended cab dually

    $$$$$$
  10. Will L.

    Hard Start after some maintenance

    I used to recommend the bosch that were 80034 duraterms (the number changed since then to a longer one but device was same). Then one failed, broke off and destroyed my piston. The plugs were not 10,000 miles use in an optimizer engine with all the maintenance done one could think of. You...
  11. Will L.

    Hard Start after some maintenance

    Plug in the block heater and see if that solves it or lessens the time it is smoking. If so, that will point towards the glow plugs not warming it enough. Is there any correlation of engine coolant temperature and smoke? Does the smoke smell like diesel fuel or like coolant? If the heater...
  12. Will L.

    SAE30R7 fuel hose

    To be clear on my last post: the r-7 stuff WILL FAIL in time. Thats why I never tried it. Use the gm ones as they are super cheap & easy to swap on the injectors, then when you are done swapping around injectors and settle on a set, the original Mercedes Benz injector hose that is 1/8” is r9...
  13. Will L.

    How do you all get 6.2s to 300K miles

    Without the signature line filled out, I can’t recall what you have or haven’t done for lift pump, fuel pressure gauge, clear line. Besides this site there are more that myself and others go to and try helping various people. You should have a 6.2 with mechanical lift pump factory that feeds a...
  14. Will L.

    What did you do with your GMT400 today...or yesterday....

    @MrMarty51 I would tend to think your 4.10 gears are having impact on the hiway mpg. Did you get a lot better mpg before part of this build?
  15. Will L.

    Seat Track 1996 K1500 Extended Cab

    AND… some of us who really want cold air blowing on us on one of the 250 hot days of the year here, learned the already mediocre a/c system somehow gets worse with the cup in the way of the vent. Idk if I can actually drive a gmt400 without a super big gulp on the seat between my legs…
  16. Will L.

    How do you all get 6.2s to 300K miles

    100% exactly what Doug said. That isn’t a theory of maybe- that is a CONSTANT repeating story. A pump or steering box should be no big deal- but they are for some reason.
  17. Will L.

    Experienced with much more inexperience!

    Meh, I say run it and have Jerry Reed playing loud as you go! 😂 I had a few single wheel 1 ton trucks, from 77-99 model years. The duals really help hold the trailer straight in crosswinds and slick roads. There are hitch devices now to fight those problems. The power the trucks have now...
  18. Will L.

    Head Lights to LED conversion.

    Before buying any headlights- go to a YouTube channel called “Headlight Revolution”. They do actual comparison testing on all different headlights. There are MANY types sold that although have better advertised numbers do horrible. Some that are even worse than just stock headlights! Adding...
  19. Will L.

    How do you all get 6.2s to 300K miles

    Excellent job doing it now instead of waiting. That saved a LOT of annoying labor.
  20. Will L.

    P30 GM 12551593 6.5 DIESEL THERMOSTAT CROSSOVER HOUSING

    They are hard to find. there are two versions of it but idk which is which, iirc they are numbered differently. Note the 4 bolts for the thermostat housing. One style has a bypass (block off) thermostat and the other does not. For obvious reasons the block off is the one everyone preferred...
Back
Top