Search results

ya i did i did everything when i changed the clutch even a new flywheel

hey guys ya its pretty much as the title says. i had a clutch put in the truck about a year ago. i have the NV4500 trans and it is a 4wd. the problem im having now is a lot of clutch chatter when reversing and starting. i also cant apply any of the go fast peddle when starting off from a light...

well ive installed a relay to help the lp today and my FTB stuff came in. i do have the MECH pump on mine.

i have a lift pump i ordered from Jegs

these relay mods speak of are they for the mech ip. it has a new lp and ip

so i have the 93 6.5 with the GM3 turbo. i have turbomaster on the gm3 and im looking at doing a set of fuel injectors and i was woundering if i would notice anything out of the feed the beast upgrade. ive been looking around for people who have done it. a buddy of mine has a ATT and the feed...

Thank you so much guys for all the help it was a long day but he was glad to hear it start.

ok so heres the progress. it runs finally. the lift pump/ lp relay/ it has a fuel leak on the back of the motor. we also had a buddy with a 96 6.5 come over and he let us unhook his pmd and then it finally fired off. the motor is very noisy when started. its kind of like a draging flywheel but...

ok so we hvae fuel and the lp is running now. there is still no start. on that same note does the PMD run the glow plugs also? the truck will crank over but wont even give a hic-up. any ideas where to start looking and if there is air in the ip is there a way to bleed it or do you crank it. the...

ok ive got a spare batt ill try it with.

wed changed the ops and still nothing. should the lp run when u turn the key

so heres were we stand so far the lp relay is new and it still doesnt come on. we also went out and picked up a new lp cause the one on there looks rough. tried to bypass but it jus clicks .

the guy said he did it and cleaned the tank out and then it ran for a day then stopped. now it jus cranks. naw we dont have another pmd. im the only other person that we know that has a 6.5. were gonna start working on it in a half hour

ok so heres the deal my buddy picked up a 95 6.5 for a good price. the only issue is that it cranks but doesnt start. we dont hear the lift pump run but it sould still start with a bad lift pump. it has a new filter. anything else we should check.

thats not bad ya i have been wanting to run it since i bought it. most my buddies have 7.3 and tend to talk down to my lil ol 6.5. i no it cant compete with the 7.3 jus wanna show that it can be a strong diesel also. and for a lil pride in my boat to say i have built this truck

ya im gonna post pics and vids. im hoping to go on monday

i didnt turn it up much but i did notice that its not starving for fuel at full boost

so im gonna take the ol 93 6.5 to a speed shop that dynos diesels. has anyone else on here put there truck one a dyno if so what were your numbers like. mods: 3"to 5" stack cold air rebuilt gm3 turbo boost controller nv4500 trans fuel turned up 4.10 gears front and rear

ok wat about any valve covers themself? mine are real rough would like to find ones that say 6.5 or something

hey guys so heres the question my driver side valve cover gasket is leaking i was wondering if anyone knew of any replacement aftermarket valve covers out there