Recent content by vail426

I would have to cut more than the nubs. The wheels and lugnuts are original to the truck and I have what is supposed to be the right cap. Like I said others are mentioning this same problem on other forums. I may just mill down the nubs and the mating area of the cap and be done with it, but i...

This truck has the PY2 option code( the bright chrome appearance wheel). This wheel has the chrome shell over the steel wheel. I was told by GM to use the 9597163 center cap. I happen to have 2 of these laying around that I did not realize I had. Anyway the cap fits to the wheel OK, but the...

If the noise is the " dink dink dink " sound I hear, it is the turbo heat shield amplifying an injector pulse. I have had that sound on my truck since day 1.....

Does it chirp with the A/C on or off?

Who did you call? I have know idea... Never mind the fog lifted.

http://www.northernautoparts.com/ProductModelDetail.cfm?ProductModelId=25658 All Matuva's part # are listed here.... I think they are all the same animal.

Yes, that is where the oil may deteriorate the rubber...

Don't post much anymore, but wonder where some of the original guys are, but now I know one is back...your input is always appreciated.

In 12 years owning the truck, 2 PMD failures, both stall no start....

You note you have a SS diesel PMD kit. If it is on the manifold it is probably cooked, but you said it was remotely mounted so I don't know if it is or isn't. The fuel you are getting from a cracked injector line may be just residual fuel dripping out, because if the engine is getting fuel it...

He has to use the clutch (2839) offered, not the P/N for his '94 as his present clutch is for the 6 bolt fan and the Duramax fan is 4 bolt. The combo will bolt up to his water pump

X2 Take it easy or you will be in the engine market.

I believe the ECM-IGN fuse is in the fuse block to the right of the E-brake release. It is 10 amp..

So you had 2 faulty EXT cables?

I mean the connection that plugs into your ext harness in the engine compartment. Are we talking about the same thing? I just fiddled with it with a pick by bending each metal contact to make it tighter. Before I did that I replaced the ext harness thinking that was causing my intermittent no...