Recent content by pxr5

Great, thanks

Picked up a great gearbox which needs the splined out put shaft cleaning, can the end case be removed with out a complete strip down? (I'm promised the box is 100% good, & if the pan is very clean I don't won't to strip it down)

I note your comments, the motor is for economy so thats good news! thanks for your help!

I've been offered a 6.2 engine & box (7004r), very cheap, the box is still on the motor,the owner carn't find any numbers on the box. Its quite a distance away, so question is did the 7004r box when fitted as standard to a 6.2 come with the puny 27t input shaft?. What Is the problem with the...

Is the more than one option on Transgo kits for the 4l80e?. With a Transgo shifter kit, what shifter do you use? my car has a rachet shifter that controls a TH400. Other than fitting the Transgo kit, what else do you do, what about the electrical socket on the side? thanks

Can any one paste a link to info regarding how the 4l80e box works?, a friend who is an electronics designer has offered take a look & may be able to build me a controller. Thanks....

Is that because the shifts are too harsh?

Any one used the Transgo manual shift kit?, done the search here, but not too clear on how good/ bad they are.

Ok, good info' thanks

The Buick has the running gear from a 70's Skylark, 455, Th400 & the matching axle about 3:1 ratio. I've the option of a TH700r4 od box from a gas engine, that might be a better bet, with a low stall converter & change/ mod the valve?

Thanks for that, but it gets kinda pricey when you add shipping+customs duty, not sure how the other link is is relevant?

Ok first off I'm in the Uk, that means parts cost loads more here, ( like double! ). I need to control the Gearbox, I'm ok,on electronics, so what about using the GM module? how hard is it to do, any info about doing this,? what about finding one?.cost? ect... The after market ECU's, are...

Leroy,that's very kind of you to offer, thanks. I'm off to the far east for three months shortly & shall get my buddies to keep an eye out for one. If nothing turns up,I'll get back to you on this when I return. cheers Tim

Just checked out that site, Wow! parts are cheap in the US!! Just need to get one posted over to me. Thanks for that Leroy!

So a gas converter even withthe correct stall won't work?