You can read about it here. http://www.dieselplace.com/forum/63-gm-diesel-engines/21-6-5l-diesel-engine/640001-my-dual-oil-filter-relocation-mod.html All the list of parts used should be in there. Unfortunately it does not get rid of the pain in the *** 4x4 oil filter adapter, I tried every...
Im guessing your talking about the secondary 12 micron filter which IMO isn't small enough, the stock ffm filter is rated at 5 microns. Were kind of thinking since I have a pretty opened up system with 6an line all the way from tank to ip, that with increased flow, the pressure's may be a tad...
I just got back from talking with Leroy again, and he says to try running a heavier wire down to the pump and running it off a relay. He also said he is running about the same pressures on his truck, so maybe I am over reacting.
I don't know,i talked on the phone to Leroy yesterday and he said this is normal at wot, but im not really too happy only getting that kind of pressure for the money and work put in to this mod.
I finished up my FTB mod. I have an FRC-10 pump I got from Leroy, I have new sending unit with deleted sock, 30 micron pre lp filter and a 12 micron secondary, all new 4An braided line from tank to the IP, drilled out IP lower fitting, with walking j top AN fitting. I am only getting 2psi. at...
Nate, I emailed the guy that created and sells the carcode program to see if it would work with windows 8, and what add ons I needed. This was this past Monday and I have still have not received a response. If I cant get a response on purchasing his programming, what's going to happen when I...
Sorry, I should have seen that in your sig. Is your compressor side an hx35 or hx40. If its an hx35, I would try a hx40 compressor, with this wheel. http://baeturbosystems.com/compressorwheelformitsubishitd04hl4350mminducer-5600mmexducer-3-3-1-1-1-4-2-2.aspx