• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Recent content by bradthefixer

  1. B

    Glow plug relay?

    got it figured out, the plunger on the GP relay was sticking in either open or closed. guess thats why WTS light was all over the place. Thanks all for your input. Now on to the ses light issue.
  2. B

    Glow plug relay?

    like I said FRESH Batteries. YES 12 volts! Load test shows strong Batts.
  3. B

    Glow plug relay?

    Like I said, fresh Batteries. Yes 12volts.
  4. B

    Glow plug relay?

    Like I said, the wts LIGHT may or may not light up.
  5. B

    Glow plug relay?

    Signature? How the heck do I do that?
  6. B

    Glow plug relay?

    Edit to my post. Glow plug relay? 1994 6.5td / I can hear the GP relay clicking when I turn the key.
  7. B

    Glow plug relay?

    Hello, just replaced glow plugs and a few Fuse able link wires. Bosch, Now my WTS light may or may not come on. Sometimes it comes on for a quick second, sometimes full heat up time, sometimes not at all. GP relay? temp sensor? Never a problem until I replaced GPs. Also I only had 10 volts at...
  8. B

    1994 6.5td Glow plug voltage.

    Have clear fuel tube at IP, no air bubbles
  9. B

    1994 6.5td Glow plug voltage.

    Hello All, What voltage should I read at an individual glow plug? with key on engine off, no other loads. I just replaced the original GPs at 273,000 miles. Been checking them every 2 years so they came out easy. except No 8 got it loose then hit the key and pow! its out. I used a 2 1/2'' hole...
Back
Top