• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Recent content by boxer10

  1. boxer10

    the !#%** 700r4 question

    Yeah, I thought long and hard about it. It's a return to the old school. I don't have the funds for a "built" 700. I could get a 400 much cheaper, and it's already been torn down and built extra HD. We are parked in near Gatesville, on the mechanic's lot. That was a bonus for us also, otherwise...
  2. boxer10

    the !#%** 700r4 question

    Sorry for the late post. There has been a lot going on with my disabled wife. I decided not to get the 700 rebuilt (cost) and I never could get the cable right. I am getting a built th400 put in. There might be a couple of problems with installation, but my mechanic can handle it. What a...
  3. boxer10

    the !#%** 700r4 question

    Thanks, 3500! In progress. Update follows.
  4. boxer10

    the !#%** 700r4 question

    First pic shows arrow pointing to the metal enclosure on the back of the tv cable bracket. No adjustment tab anywhere. Third pic shows a blurry image of the metal enclosure behind the bracket.
  5. boxer10

    the !#%** 700r4 question

    OK, guys, I pulled the doghouse cover and attempted to adjust the TV cable. Only problem is, I see absolutely no way to adjust it. Behind the bracket that holds the TV cable in place is a metal shroud that has no tab.
  6. boxer10

    Hi all

    Thanks for the fire support! Lord knows we used you!
  7. boxer10

    Hi all

    Thanks, btfarm! Americal division, and 4th infantry.
  8. boxer10

    Hi all

    You a veteran too? Me from 1968-71.
  9. boxer10

    Hi all

    Broke down in a RV park, Temple, TX,
  10. boxer10

    the !#%** 700r4 question

    By the way, here is a pic of my rig.
  11. boxer10

    the !#%** 700r4 question

    Gerrysjeep: did this place do the install or did they just rebuld? They did both. Had a couple of helpers that knocked the spark plug wires off, I had to find it and point it out to them 3500GMC: I will remove the doghouse cover today and check the cable. It is TBI, by the way. BudTx...
  12. boxer10

    Hi all

    Glad to join this forum. I am a total newb when it comes to mechanical. I recently retired with my wife to a custom built MH (I am a carpenter). We are both disabled but we travel the country as best we can. Right now we are broke down in Texas due to another transmission failure. Hope to get...
  13. boxer10

    the !#%** 700r4 question

    Hi all. I am new here, got a long-winded tranny problem. I have a 1987 chevy cutaway (box truck) 1 ton, 350 engine, dually. The original transmission burned up and I had to buy a used tranny (funds were non-existent) to replace it with. I have very little knowledge of transmissions, and the...
Back
Top