so on my fuse pannel their is a fuse that has been blown since i got the truck and never really bothered me but im just wondering what is the SOL circit for. i looked in the ownes mannual and it has all the others but not that one. can some one tell me what it controls or dose
so here is an update to my update. got everything going then the master cylinder went out just a day after I got everything working so I cut my losses and bought the pre-bleed kit got it in and 3 days after that push the clutch in to down shift and feel a pop as I push it. well this seems to be...
it was only 15lb and had a boost leak and im not sure of the size i just know that it came frome a cummins and did not tune it did however throw head studs at it and new injectors and new exhaust compnets at it but since ive put the injectors in i havent redynoed it
i am looking for a 3500 crew or extended cab with the 6.5. i want to get a DRW model. not to pickie on 4 or 2 wheel drive(would prefer 4x4) also not a big deal about the trans.
ok so update for to day. same asit was before I tried to pushing the slave rod in, I also put a vacuum to it and I also tried to bleed it while pumping it slowly
ok so had to replace my cluch master cylnder and did and also the slave figure good time to do it. well i got them all in got a new hydro line to go from one to the other got all installed no real problem. here is the problem went to go bleed the system and after about an hour and a half i have...
yeah i did it a few months ago and did use the adhesion promoter and glad to say that is is still working well and the paint is not chipping off of them