1. Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

New Profile Posts

  1. wirenut450
    wirenut450 n8in8or
    I was wondering if you are happy with your Delta camshaft? I am starting a build for my suburban and I think I use it similarly to you.
    1. n8in8or
      n8in8or
      I don’t have the Delta camshaft in the truck anymore. It didn’t give me any noticable power by the seat of my pants and it may have even caused some other problems. I’m at 350hp and I’m still not sure if the stock cam is holding me back.
      Jun 14, 2018
      wirenut450 likes this.
  2. Sharpee
    Sharpee
    Fixn to go see what's up with my tranny and hope for the best. Please be something easy and cheap
  3. KEN PEARSON
    KEN PEARSON
    1993 Chevy 3500 crewcab dually 6.5 turbo diesel
  4. Bobonopolis
    Bobonopolis
    2002 2500HD Crew Cab Duramax/Allison bone stock
  5. Shamman
    Shamman
    1996 k1500 6.5
    1. Jaryd likes this.
    2. Jaryd
      Jaryd
      Welcome to the forum
      Feb 17, 2018
  6. Bigchevyrollinboii
    Bigchevyrollinboii
    So i have a 97 silverado with a blown trany and a 98 tahoe 4door lt that's not running rite can i swap the tranys?
  7. SlowBoat
    SlowBoat Will L.
    Will, need to pick your brain. Have a M1028 that the GPR failed. Got a replacement BWD GPR1 that wont work with glow plug controller. Has continuity between two small posts. The original GPR does not. It just quit switching. Do you have a brand and part number for a good heavy duty replacement? Cant read the numbers on the GPR in my M1009.
    1. Will L.
      Will L.
      Pm sent
      Feb 3, 2018
  8. Herb Buckingham
    Herb Buckingham billyg38120
    Billy,
    Don't know if you've been on here lately, but I have a 94-95 4L80E trans I would like to put in a 92 RV(with bolt on yoke) What do I have to do to the later trans to make it work with the 92 ECM?
    Thanks
    Herb
  9. Henri Boudreau
    Henri Boudreau THEFERMANATOR
    Hi Fermanator
    Would you happen to have a tune for an OS 12603624 that has a standard transmission. I'm trying to make a standalone but the engine turns off after 30 seconds.
    Henri
    Thanks for your time
    1. THEFERMANATOR
      THEFERMANATOR
      Pretty much everything I have left for base OS's is in the tune library.
      Jan 13, 2018
    2. THEFERMANATOR
      THEFERMANATOR
      Just looked, and that is a very early 06 lly OS. Any lbz manual trans tune should work. And if it's shutting off after 30 seconds, that doesn't sound like a tune issue, but more like running out of fuel or something else.
      Jan 13, 2018
  10. Hink
    Hink Twisted Steel Performance
    Hey SC,
    I just wanted to let you know that I mentioned your cooling coatings in my new article on the site http://www.65turbogarage.com/stop-65-overheating.html.
    I figured it would be ok since it's free advertising but I wanted to let you know in case there was an issue! : )>
    1. Jaryd likes this.
    2. View previous comments...
    3. Hink
      Hink
      Then I'll do the same process with the uncoated radiator for those numbers, and then again the same process with the coated radiator.

      Do you have any other suggestions?
      How would you suggest is the best way to go about application of your product? You mentioned self application in your earlier message above, or should I have the radiator sent to you for application?
      Apr 4, 2018
    4. Twisted Steel Performance
      Twisted Steel Performance
      Send it to me, that way their will be no chance it isn't done correctly.. The most accurate way to collect the data would be a temp sensor in the radiator just above the lower hose for a dedicated digital gauge, that is where I have one and it gives the water temp going into the motor after it passes through the radiator..
      Apr 4, 2018
    5. Hink
      Hink
      I have some potentially very good news, can you call me as soon as you can? 360.798.1578
      Apr 4, 2018
  11. skenard
    skenard
    Im new here but im looking to see if anyone has been able to get a modified tune for a 2016 lml duramax?
  12. skenard
    skenard
    off work!!:)
  13. Tovar
    Tovar THEFERMANATOR
    There is a little white plug on top of the tumbler casing. I do not see how to remove it. This is on a '99 6.5. I have posted my request three different places on this site (electrical, steering, and 6.5), and no one seems to know how to remove this plug. I am trying not to destroy something, and make my job worse. I have pictures of the plug in question on the site postings (ignition switch harness plug).
  14. Islandboy
    Islandboy
    New inner fenders that can be removed without taking anything else out or apart in or out of the engine bay. Cutout outer fenders fabed up
  15. Islandboy
    Islandboy
    I forgot to mention that that I put in intake sensors pre and post turbo also a catch can.
    1. Jaryd likes this.
  16. Islandboy
    Islandboy
    HX40W in , KOJO tune in, Battery and air box relocated with 3" air ram and boosting 20psi !
    1. Jaryd likes this.
  17. razur65
    razur65
    Hello all, so glad I found this site for 6.5 info! Was thinking about doing the cummins conversion before I found started reading here.
    1. Jaryd likes this.
  18. Project G3
    Project G3
    85 GMC 1500 4X4
  19. Project G3
  20. Brandy White
    Brandy White
    I'm frustrated have to force 04 canyon shifter for park