• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

zf6 t-case compatibility

red

red

Being a lake bum in Texas
Messages
2,028
Reaction score
1,762
Location
Lake Brownwood, Texas
found a zf6 near my home station for $1k (unknown if 2wd or 4x4) but am curious whether an np205 t-case will bolt up to it or not if it is 4x4. does anyone know?
 
anybody? the 6 speed is the 4x4 model (what i would need). just trying to figure out if it has the standard bellhousing from chevy, dont know if there is a different bellhousing pattern for the 8.1 and duramax than there is for the other v8's such as a 454. and also dont know if the transmission (on the output side) has a different bolt pattern than the standard 6 round that gm has used since the mid 80's.
 
The 8.1L is the same block as the 454 AFAIK, so if it fits that it should fit your 454 bellhousing at least.
 
You must log in or register to reply here.
Back
Top