• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

well let me tell ya

BigBearZach

BigBearZach

New Member
Messages
156
Reaction score
0
Location
Eglin afb
just got my new turbo in the truck the other day and let me just say damn. the truck takes off much better and seems to have a better rpm range now than it did with the stock turbo.i am also now making boost much easier. i will be laying down some numbers on the dyno tommorow with the new turbo cant wait to see cause it has to be better than my base line numbers
 
Me too because as soon as im done with the dino run im ripping into it and putting in head studs and injections
 
what kind of injections, water - meth or HO injectors. I have both, well the injectors are from Heaths so they gotta be good. The turbo I have is an ATT and I'm sure you'll like the upgrade even more over time. It'll also pay for itself in fuel savings over time.
 
Lol, your not gonna get 40hp just from injectors alone. The IP is what determines the fuel output. The only way you might notice more power from marine injectors is if you use a db4 pump or marine pump. Stock bosch injectors are plenty up for the task.

What size is the HX35?
 
Im with Jorge on the injectors. And did you lay down any numbers today?! I've been dying for an update. I love any dyno runs
 
Those are some great numbers. Nice torque. My dyno run with the GM-3 only yielded 303ft lbs. I am very jealous of your torque number. Congratulations!!
 
You must log in or register to reply here.
Back
Top