Hello again. I have a question about valve seals on the 6.5. I have pulled apart 2 different motors now one being a 97 turbo and a 99 military non turbo. The 97 heads had valve seals only on the intake side not on the exhaust. The 99 non turbo had none at all? Anybody local doesn't have a clue to if they should have the seals on both intake and exhaust? Or just intake? Or non at all seeing it was a military motor? Does it make a difference that one has a turbo and the other doesn't? I have only found one Local diesel shop that will even talk about a 6.5. And they don't have a clue on ether. If anyone has an answer to this question I would greatly appreciate it!
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Valve stem seals?
- Thread starter Ratkilr
- Start date
I have the tool & rent it, to cut the seal boss to the common .530" seals most all other motors use. every head I build I cut both intake & exhaust boss and install seals on both... My web site shows the part number for the 2 size seals needed also.
MrMarty51
Well-Known Member
That is some good information.
The Teflon stem seal cant be beat.
Husker6.5
135' diagonal 16:9HD, 25KW sound!
Ah, hell, who needs valve stem seals? It's an oil burner, isn't it? LOL!
Husker6.5
135' diagonal 16:9HD, 25KW sound!
Man, we really need a sarcasm font!