• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Using Timbrens along with Cognito Leveling Kit?

N

NNYdiesel

Recruit
Messages
117
Reaction score
1
Is it safe to use Timbrens for the front end if you have a cognito leveling kit installed? I am running a 8.5' Fisher Stainless V.
 
I don't see why not. I did it for 1 season before I lifted the truck. I was running a Western Unimount MVP 8.5.
 
No issue, just make sure your plow is set to the correct height per the installl instructions. If the mount is to high it will cause faster wear and might "hook" more on a gravel drive. IIRC Blizzard is 12 1/2 to CL of the mount, Western is 14 3/4 and Fisher is 13.....
 
They take like 15 minutes to install I hope you are not paying alot them to install for you. I didn't even have to pull the tire.
And where abouts is NNY to you. lol I am from carthage
 
Right down the road just outside of Dexter actually. I am usually out on FT. Drum quite a bit. Do you work out there too?
 
You must log in or register to reply here.
Back
Top