• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Tranny swap clarity

D

deuce1981

New Member
Messages
10
Reaction score
0
Location
Salt Lake City,UT
So I want to swap my SM465 for an NV4500. From what I've read, it's a pretty straight forward swap but I'm not too sure. Is it pretty much a bolt in swap? My main concern is the hydraulic clutch setup. Can I retain the SM465 master and slave? Can I just swap bellhousings and keep the whole throwout mechanism? Thanks in advance.
 
I believe you can likely reuse the SM465 master and slave if you get the earlier style bellhousing for the NV4500.

You might try contacting NV4500.com. They do a lot of NV4500 swaps and conversions.

Somewhere there is a forum dedicated to the NV4500. I've seen it referenced on this site but can't seem to find the post.
 
You must log in or register to reply here.
Back
Top