1995yukon65
Member
Yea... it was $1200 just to get her running again. Then 400 for the exhaust and about 400 for Tue handles. Shes just lucky I love her
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
The Yukon bit the dust.... for now
- Thread starter 1995yukon65
- Start date
buddy
Active Member
Good to hear its back on the road. Where after the downpipe did you split to the dual pipe, and muffler(s)? sig needs an update now
What gearing does the Tahoe have?
What gearing does the Tahoe have?
1995yukon65
Member
It splits about 2.5' after the downpipe. no mufflers. and she has 3.73 gears in her with the g80 locker. and yea i gotta update the signature... lol... things change too often to keep up with the signature
1995yukon65
Member
Well guys got the cab lights done. I'll get pics of them up tomorrow. Also just ordered the FTB kit and rattlestops.
1995yukon65
Member
Well, got some bad news everyone, I'm thinking that after about 240k the block has had enough. I've been fighting an overheating issues over the past 2 weeks, have flushed it multiple times, new thermostat and gasket, checked fan and clutch and verified coolant flow. Temp is swinging up to 240f with no load on the motor within 5 minutes of starting truck. For now I am going to baby her as much as possible until I can get a teds motor.
Debating on what to do though, debating between ordering one of the center mount motors since I know they are already turbo spec and either reusing my heads or hunting down the humvee intake setup while retaining the side mount turbo, or second option is getting the n/a spec long block they have and using that.
Ideas or suggestions are more than welcome, and thank you in advance for any information y'all can provide.
Debating on what to do though, debating between ordering one of the center mount motors since I know they are already turbo spec and either reusing my heads or hunting down the humvee intake setup while retaining the side mount turbo, or second option is getting the n/a spec long block they have and using that.
Ideas or suggestions are more than welcome, and thank you in advance for any information y'all can provide.