• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Takin it to dmax !!!!

robzombie4551

robzombie4551

robzombie4551
Messages
959
Reaction score
9
Location
land of the lost. TAKE YOUR COUNTRY BACK
Installed the d-fan today and it works to good. I have to undo the fan clutch mod because it pulls so much heat that the fan screams after only 5 min. of towing. stock fan wouldn't dream of coming on unti 195/200 [where I had it set]. Now it comes on at 185. The gauge stays at 185 even with egts sustained at 1,200.A very good problem to have. Thanks for the advice everybody. Just wanted to share some good news. Thanks Rob.

NOW THE COOLEST KID ON MY BLOCK!!!!
 
Last edited:
I have the same problem, it works so well even when the clutch is not engaged. I cant get it up to even 180F at idle. Im putting an ACDelco 190F T-stat in, instead of the 180F.
 
You must log in or register to reply here.
Back
Top