ak diesel driver
6.5 driver
Can the stepper motor be changed without too much hassle?
Sent from my Studio 5.0s using Tapatalk 2
Sent from my Studio 5.0s using Tapatalk 2
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Stepper motor
- Thread starter ak diesel driver
- Start date
bison
Well-Known Member
Les i think it ain't to much trouble
Difficult part may be hooking the stepper screw stem with the slotted ball socket back on the little lever with the ball coming from the advance cover (feel only)
After you remove the two stepper hold down screws move the stepper to the pass side to slide it of the lever.
Difficult part may be hooking the stepper screw stem with the slotted ball socket back on the little lever with the ball coming from the advance cover (feel only)
After you remove the two stepper hold down screws move the stepper to the pass side to slide it of the lever.
ak diesel driver
6.5 driver
Thanks Simon
Sent from my Studio 5.0s using Tapatalk 2
Sent from my Studio 5.0s using Tapatalk 2