-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Steering Stabilizer...
- Thread starter roosky01
- Start date
CtChevy427
Fuc*ed over by head admin......
I have seen people replace the OEM with Rancho. You might want to see if Cognito makes one.
DunesRunner08
Banned
There are a few companies that make the dual stabilizer kits that are pretty sick, but the Rancho one is a good OEM upgrade....
durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 3
I looked at mine the other day when I installed my centerlink 
All I can say is it is a pain to seperate it from the centerlink. You can get on the nut with a socket, however if you have an 18mm ratchet wrenh it will be a breeze, kinda.
Then you gotta find a way to pop it out. I couldnt get a hammer in there to save my life.
A tie rod fork would work best, but I was able to get a pry bar in there to finally get it out.
what are the advantages of an aftermarket one.
All I can say is it is a pain to seperate it from the centerlink. You can get on the nut with a socket, however if you have an 18mm ratchet wrenh it will be a breeze, kinda.
Then you gotta find a way to pop it out. I couldnt get a hammer in there to save my life.
A tie rod fork would work best, but I was able to get a pry bar in there to finally get it out.
what are the advantages of an aftermarket one.
durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 3
oh and if you wait a couple weeks our lift should be in if you wanna bring it over to the new shop.
BTW you gonna make it up to the pull in sauk on saturday night. Im making my first hook for the season there. Kind of a test and tune run for me.
Then its off to harrisville on memorial day if the truck is still in one piece.
Ive been cramming to get it ready for the season and im still behind.
BTW you gonna make it up to the pull in sauk on saturday night. Im making my first hook for the season there. Kind of a test and tune run for me.
Then its off to harrisville on memorial day if the truck is still in one piece.
Ive been cramming to get it ready for the season and im still behind.
durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 3
Ya I guess. Ive pulled a lot before but this truck is completely different.
My truck has changed a lot since last year and its gonna take a lot to get used to.
I usually just sit in my truck in line and space out till its my turn. Afterwards Its a huge relief that I made it down in one piece.
But youll definately see the "dieselholic" up there. Im hoping to place in the middle of the class, as long as a bunch of Furds show up again I should be fine.
My truck has changed a lot since last year and its gonna take a lot to get used to.
I usually just sit in my truck in line and space out till its my turn. Afterwards Its a huge relief that I made it down in one piece.
But youll definately see the "dieselholic" up there. Im hoping to place in the middle of the class, as long as a bunch of Furds show up again I should be fine.