• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Square body owners needed

Twisted Steel Performance

Anything worth doing is worth overdoing.
Messages
3,983
Reaction score
7,588
Location
Pauline, SC
I have a project I'm working on and I need square body owners that would be willing to measure the overall length of your steering shaft from end to end installed.



PM me please... or post lengths and year of truck here...
 
Yes to both...

I'm building steering shafts and want correct measurements for them...

also, have a look at both connections, I know 79 up are the same connection as the 90's trucks are but not sure the length is the same...
 
I've got a couple here . Do you want from where the rag joint bolts on to the end of the upper link ?
 
Sorry for the delay. I get about 20-1/4" on my 84 k30 not including the rag joint itself. This doesn't account for play in the slip joint though.

Hope this helps

Resizer_15678809490950.jpgResizer_15678809490951.jpgResizer_15678809490952.jpg
 

Attachments

  • IMG_20190907_112134_7.jpg
    IMG_20190907_112134_7.jpg
    67.7 KB · Views: 0
  • IMG_20190907_112151_1.jpg
    IMG_20190907_112151_1.jpg
    77 KB · Views: 0
Back
Top