Can not find mine. Anyone have a part number?
On back side of block & caps off camshaft.
On back side of block & caps off camshaft.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Size and or part # for rear cam freeze plug ??
- Thread starter Burning oil
- Start date
Chevypoor
Active Member
From Rock Auto:
Dorman #555081
Gm #(I think) 3999200
55.56mm
2.226mm
Used a 95 in the search query.
Dorman #555081
Gm #(I think) 3999200
55.56mm
2.226mm
Used a 95 in the search query.
Great thanks. I was going to measure my cam plug hole and go on the hunt today. I could not find one on Google search??
3500GMC
What T F, over
Use loc-tite or equivalent to help keep this cam plug in place. Seen em pop out of a running engine before. MGW even uses small cap screws with washers as a safeguard.
Chevypoor
Active Member
They can also pop out on a gasser. I use the Permatex High Tack when I set mine. I also use the stuff on all my press in seals as well.
Got the plug yesterday. Have not checked to see if its the right one yet. Will use some pooky to hold it in.