Added a shock relocater kit on my truck. How do I do the measurements for figuring out what size shock will fit ( extended/compressed). Also whats the best angle to mount them. The kit is behind the axle.
You might want to contact Nor-Cal Nick at www.NorCalTruck.com and ask him. -Nick is is an expert on suspensions. He is a member here and is very helpful and always willing to answer questions.
The rear. Here are some pictures of the shock relocater. wanting to know how to fiqure out the size of shock needed using the the upper and lower shock mounts. Plus whats the best angle to mount the shocks.
I would have the lower mount closer to your axle and weld them on. The farther out the more leverage to tear off. I would try and stay about 15-25 deg's in angle.