Running without the fuel plate?

[hereismylife]

Anyone here running without there fuel plate? If so how long and how is it running?

 

[Cumminalong]

Hey, you stole my Avatar picture.

Give that back!

):h

 

[hereismylife]

lol):h

I was reading your signature. Man your truck has to move:thumbsup:

 

[Cumminalong]

lol):h

I was reading your signature. Man your truck has to move:thumbsup:

Yeah, it'll scoot right along.

That actual avatar that I usually use has the turbo's spinning, but you can't upload an animated gif here.

Here's what they really look like....

Here's the truck on a bad day........this is before the valve springs, rockers studs and pushrods. I was blowing the valves open at 60 psi and kept having to get out of the throttle. Couldn't get consistent for crap. Had to turn the power down on the Smarty to 3 and the Edge down to 2 to keep the RPM's and boost under control. Fastest I was able to run was 8.112 on the 1/8th

It's capable of low 7's on the 1/8th, low 12's / high 11's on the 1/4.

The truck with the camera on the side is mine.

http://www.youtube.com/watch?v=G-1VmEgrFCc&feature=channel_page

Here's the video I do each year on one of the other sites.

LINK

 

[hereismylife]

I like the spinning better.

Also both vids were cool:thumbsup:

Thanks for sharing.

 

[Cumminalong]

Sorry to jack your thread......

Back on topic!

:thumbsup:

 

[6fiveturbo]

Anyone here running without there fuel plate? If so how long and how is it running?

check this out

http://www.cumminsforum.com/forum/94-98-tech-articles/127099-running-no-plate.html