SQ is the SQUAD
New Member
- Messages
- 2
- Reaction score
- 3
did this ever go anywhere?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Real time tuning for OBDII 6.5's? maybe.....just maybe
- Thread starter great white
- Start date
MrMarty51
Well-Known Member
Welcome to the forum SQ.
I too have read a bunch of this thread. I just dont have the imagination it would take to try doing a tune on My own.
John over @quadstar87 can fix You right up with a custom tune.
SQ is the SQUAD
New Member
- Messages
- 2
- Reaction score
- 3
not looking to buy a tune. i will help develop a diy solution.
MrMarty51
Well-Known Member
That takes a LOT of understanding of how the systems all ties together, aaaand, what to and what not to mess with to get everything tuned the way a feller would like it to be.
I thought I would try doing some tuning. I have a 78 MG-B Roadster. Switched it over to the twin SU carb setup with a few mods to accept some fuel injectors.
Put together a DIY autotuned controller, installed a heated O2 sensor in the exhaust hooked it all up but I did not understand enough about what to and what not to be messing with I finally give up and put the EFI system on the shelf. I did make some changes to the control unit, I should see about getting back into the website and see if they have a stock program loaded and maybe be able to put it all back to the way the computer was when original.
That's My experiences with trying to do a tune. LOLOLOL