Diesel Nut
Member
Looking for a bell housing for a 93 chevy with a nv4500. If anyone has one please let me know a price or if you know where i can find on.
Thank Nick
Thank Nick
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Looking for a Bell housing for 93 chevy with a nv4500
- Thread starter Diesel Nut
- Start date
GM Guy
Manual Trans. 2WD Enthusiast
there are a few on ebay. from 150-350 last time I checked. 92-95 should all be the same.
Diesel Nut
Member
Ok thank you GM Guy. I'll check them out. Just a thought, The external slave is nice but I can get a new internal bell housing for $200, upgraded slave set up for $450, a hyd. line for about $50.
Do you think the internal would be better. I know I'll have to change the the input shaft bearing cover.
Do you think the internal would be better. I know I'll have to change the the input shaft bearing cover.
GM Guy
Manual Trans. 2WD Enthusiast
is this for your 93 pickup that already has the external slave?
if so, the internal slave bellhousing will NOT bolt up, bolt pattern from trans to bellhousing is different. *all bellhousing to engine patterns are the same)
plus, I dont really care for the internal slave. gotta tear it all apart to change it, whereas all you do is grease the pivot ball every oil change, and if the slave goes, you spend about as much time as a starter to change it with the external bellhousing.
So, my vote is to stick with the external slave like what you allready got.
if so, the internal slave bellhousing will NOT bolt up, bolt pattern from trans to bellhousing is different. *all bellhousing to engine patterns are the same)
plus, I dont really care for the internal slave. gotta tear it all apart to change it, whereas all you do is grease the pivot ball every oil change, and if the slave goes, you spend about as much time as a starter to change it with the external bellhousing.
So, my vote is to stick with the external slave like what you allready got.