• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Leveling your tow mirrors, a "How To"

SS FORCE

Active Member
Messages
251
Reaction score
156
Location
West Jordan utah
I've been all over the web looking at what it took to level the 06+ tow mirrors and figured since it was a balmy 32 Degrees outside I would attempt the mod and share the steps in case anyone else was interested.


A picture before, not a fan of the tipped up mirror angle
35446-c8bb926c958ef041cc707daf17dc7268.jpg



Before picture with mirrors extended
35447-200d2d65e8d2f340142de29d788c0d3b.jpg



And one from behind just for fun.
35448-a2b106660494ef5aba99929251471c21.jpg


Its extremely simple to level your mirrors, job was done in about 30 minutes. To start you'll pop off the little plastic cover between the telescoping arms of the mirror. I just pinched the plastic together on both sides and it popped off. Some others mention using a flat blade screw driver and pry from the back(furthest away from the hood). Based on the year of truck you'll either find allen head screws or phillips. My 06 was phillips, shown below.
35449-d46fd5d1d7b72660781cd1639232bb0c.jpg


From here you will loosen the bottom two screws several turns, and completely remove the top two screws. Like most of us this mod will end up being free as we all have a couple washers lying around. I used 3 1/4'' washers per top screw (12 total for both sides).

35450-f70e297112b2a85067db27eeb76e4973.jpg


Put the washers behind the upper bracket, tighten the screws down and you've leveled your mirrors.
Side note - Some have experienced issues with the tension on the spring holding the mirror from folding forward or backwards while driving, since you've rocked the mirror out and away from the spring it does decrease spring pressure against the mirror, and if you pry up on the mirror it can flex back to its "tipped up" position, I have not yet experienced any issues with wind blowing the mirrors out of driving position or bouncing around, but if you do you can add a washer behind the spring to regain that pressure back.

One more modification, now that your mirrors are leveled you will have to trim the top of the plastic cover piece you popped off in step one. There is a ridge on the back side of the plastic piece about 1/8'' to 3/16'' from the top, if you trim to this line it will allow enough room to let the mirror swivel yet not show too much gap. I ended up doing this with a razor knife, and yes I cleaned up the top so its not choppy and uneven looking like in the picture below.

35451-13617ceee9a9704858a49b37890689bd.jpg


Now the finished product. Enjoy
35453-25341602f1b628595f18b145f48b179e.jpg


extended
35455-8d3e6f48dbca80ed18e388307800402b.jpg


extended from the back
35454-57a4591929fe018ef73d0eda7c9ebbe0.jpg


normal from the back
35452-95c3b56934775677c212c54396cd67cf.jpg
 

Attachments

  • IMG_1679.JPG
    IMG_1679.JPG
    128.4 KB · Views: 4
  • IMG_1680.JPG
    IMG_1680.JPG
    129 KB · Views: 4
  • IMG_1681.JPG
    IMG_1681.JPG
    128 KB · Views: 5
  • IMG_1682.JPG
    IMG_1682.JPG
    98.2 KB · Views: 5
  • IMG_1685.JPG
    IMG_1685.JPG
    122.6 KB · Views: 5
  • IMG_1686.JPG
    IMG_1686.JPG
    147.1 KB · Views: 6
  • IMG_1688.JPG
    IMG_1688.JPG
    171.2 KB · Views: 5
  • IMG_1687.JPG
    IMG_1687.JPG
    158.2 KB · Views: 5
  • IMG_1689 (1).JPG
    IMG_1689 (1).JPG
    180.9 KB · Views: 5
  • IMG_1690.JPG
    IMG_1690.JPG
    157.6 KB · Views: 4
Looks great. Nice job on the write up as well!
 
Last edited:
Thank you all for the positive feedback. I love the way it looks. It seems to give a better viewing angle too from the driver seat as well.
 
Awesome DIY fix!
I have somehow gotten used to the dihedral wing type of mirror. But I think I will attempt this fix when the weather breaks.
Thanks for doing this for all of us.
 
Back
Top