kane
New Member
During last 10 month I have "updated" my Sub with Marine injectors, EM chip, K&N air, 3" downpipe, took off cat & orig. muffler, BoostFooler (resistor), optical sensor adjustment... and finally it was time to cool IAT's.
Sub's been with me 14 months/26k miles.
A friend had a ATA cooler what he planned for his Suburban. Now he plans WTA, so this ATA cooler was free to use...
It was pretty perfect shape for what I thought it should be like.
First was mounting under bumper
I started from the bottom
Just enough turns (90/60/45 deg. silicon & iron pipes)
There is enough room to get pipes up even I have vacuum pump...
Sub's been with me 14 months/26k miles.
A friend had a ATA cooler what he planned for his Suburban. Now he plans WTA, so this ATA cooler was free to use...
It was pretty perfect shape for what I thought it should be like.
First was mounting under bumper
I started from the bottom
Just enough turns (90/60/45 deg. silicon & iron pipes)
There is enough room to get pipes up even I have vacuum pump...
Last edited: