Injector leaks...

[Randy Curran]

So I got the dually running(sorta) but two of the injectors are dripping fuel. There working(I'm guessing), is there an o-ring to replace? And what tool do I need to remove them.

Thanks!!!!

 

[bk95td]

So I got the dually running(sorta) but two of the injectors are dripping fuel. There working(I'm guessing), is there an o-ring to replace? And what tool do I need to remove them.

Thanks!!!!

No o-rings in the injectors and the lines. all machined finish fit. You could try loosening the injector line and tightening the top to the bottom. If I remember correctly the top takes a 22mm open end wrench.

 

[Acesneights1]

Sure it's not a return line ?

 

[turbovanman]

Sure it's not a return line ?

+2, if its a small drip, most likely its the return line, if its the actual hard line, it won't be a drip, :nonod:

 

[6.2 turbo]

The hard lines can drip,mine did already.

 

[Acesneights1]

The hard lines can get a hairline crack at the flare...ask me how I know...

 

[Randy Curran]

Got it fixed. The return lines were brittle. Replaced them and it's good to go. Now if I could just keep the damn thing running life would be good!