packratt
Active Member
Am I nuts or do I remember a post with part number for the wiring harness that runs beneath the intake from the main wiring harness to the IP?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Injection pump harness
- Thread starter packratt
- Start date
Bullseye240
Member
Probably yes to both!!!):h
BigBlueChevy
Compression Ignition Addict
The answer is most likely yes to remembering one as I remember way to many posts from here. Although you may remember it, this doesn't mean you will actually be able to find it... Sadly...
NVW
Well-Known Member
GMCTD posted the later models had a better wiring harness recently. Try searching his recent posts. Leo
packratt
Active Member
For some reason I was thinking it was Jifare and couldn't find it in his posts.
JMJNet
Recruit
The thread was about the OS filter harness.
I did not recall that they mentioned any part number for the Injector Harness.
My understanding was (I could be wrong) that the injector harness is the same one that the PMD hook into (at least one of the plug). If you buy a new Stanadyne PMD, it usually comes with it.
I did not recall that they mentioned any part number for the Injector Harness.
My understanding was (I could be wrong) that the injector harness is the same one that the PMD hook into (at least one of the plug). If you buy a new Stanadyne PMD, it usually comes with it.