I need some 16.5"x12" 8x6.5" wheels

[midniteplowboyy]

Where can I order some heavy duty wheels from.

I keep cracking my rock crawlers where the center disk meets the rim.

I need some 16.5"x12" 8x6.5", with alot of backspacing, atleast 4.5" backspacing, preferably 6"(0 offset).

I dont care what they look like, as long as they are strong.

Thanks,

 

[dragogt]

He does custom backspacing..

http://www.trailworthyfab.com/Custom-Hummer-Wheels/

Do you know if stock H1 rims will rub the tie-rods or any thing???

 

[midniteplowboyy]

He does custom backspacing..

http://www.trailworthyfab.com/Custom-Hummer-Wheels/

Do you know if stock H1 rims will rub the tie-rods or any thing???

Thats pretty cool, thanks. Wonder if they widen wheels? IIRC, HMMWV wheels are around 9" wide.

I had thought about adding 3" to the outside of some HMMWV rims, but there is not much room to work with on the outside lip.

 

[qwomack]

You might also want to check out Stockton Wheel, http://www.stocktonwheel.com. I have never used them but it is an option.

 

[BigBlueChevy]

*cough* pirate 4x4 *cough*

 

[bison]

Where can I order some heavy duty wheels from.

I keep cracking my rock crawlers where the center disk meets the rim.
I need some 16.5"x12" 8x6.5", with alot of backspacing, atleast 4.5" backspacing, preferably 6"(0 offset).

I dont care what they look like, as long as they are strong.

Thanks,

why not just beef them up

 

[dragogt]

*cough* pirate 4x4 *cough*

Check out our site please.

www.TrailWorthyFab.com

The volume of quotes has been crazy as of late and I'm leaning on the site to help me out with them.

Thanks for checking us out!!

Todd

Where do ya think the link came from... :thumbsup:

 

[midniteplowboyy]

why not just beef them up

I thought about that, but think the rim is just to thin. I think it would just move the crack point out further or cause the disk to crack where it was welded.

 

[midniteplowboyy]

Thats pretty cool, thanks. Wonder if they widen wheels? IIRC, HMMWV wheels are around 9" wide.

I had thought about adding 3" to the outside of some HMMWV rims, but there is not much room to work with on the outside lip.

I was wrong, I checked there 8-1/4" wide.