hx40wii down pipe

[Skittlesquad]

hi im building a 6.2/6.5 hybrid for my k10 and was wondering what downpipe i could use for the turbo, it has a 3in v band on it, is the stock downpipe ok or is there another avaliable, also where can i find an oil feed line to run it because i dont have one being originaly a non turbo and i forgot to take it off the donor engine, thank you much

 

[Jorge6.5]

Just search the threads in the performance section. Plenty of info on this there

 

[DieselMike1]

You need a M12X1.5 male metric x 1/4" female nptf. http://www.hydraulicsdirect.com/ProductDetails.asp?ProductCode=9235 if your going with a cko turbo, then get the original line and fittings off a 6.5 to mate to that fitting. Don't forget to grab your oil return tube also.