625fireman
I have injecter-itis
Here is my build of my turbo master. If you do this I cannot recommend enough on the fact of installing a boost gauge with this. It is an absolute must in order to set it correctly
First pic is items you will need to buy or acquire ):h
1. 1/4" by 1 1/2 long bolt
2. 1/4" heavy fender washer
3. 3/4" by 2.5" spring ( I bought mine at TSC)
4. 1/4" nylock nut
second is vacuum acutator on turbo
You dont have to remove turbo for this but I had it off already
Third remove 2 bolts holding vacuum can to compressor housing and remove e-clip holding arm to wastegate. be carefull it can fly away without warning, it is not the easiest thing to get to.
First pic is items you will need to buy or acquire ):h
1. 1/4" by 1 1/2 long bolt
2. 1/4" heavy fender washer
3. 3/4" by 2.5" spring ( I bought mine at TSC)
4. 1/4" nylock nut
second is vacuum acutator on turbo
You dont have to remove turbo for this but I had it off already
Third remove 2 bolts holding vacuum can to compressor housing and remove e-clip holding arm to wastegate. be carefull it can fly away without warning, it is not the easiest thing to get to.