signboss
New Member
replaceing steering and suspension stuff on my 94 gmc 3/4 (8600) 4x4 my question is about sway bar end links does it matter if the bolt is upside down the bushings are all in the right place
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
help
- Thread starter signboss
- Start date
3500GMC
What T F, over
Same basic goal, holds the stuff tight.
The lil hole in the A-arm is a real Pain in the Arse huh?
The lil hole in the A-arm is a real Pain in the Arse huh?
Welcome,
And it won't matter.
And it won't matter.
Ed HD
Formerly: Dad's 05 LLY
If you had a lot of bolt sticking out the bottom and went over a big rock or something it could bend it, but it's unlikely, and I wouldn't worry about it.
3500GMC
What T F, over
The lower arms on these 3/4-1ton trucks are hollow- two halves. the SB bushings clamp to the top half layer. There's 1.5ish dia hole in the bottom half for access.