• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

HELP...key fob not working

richard cheese

the MAIN muff hugga
Messages
345
Reaction score
0
here is what I have done to remedy the problem

changed the batteries in both controllers
checked the fuses just inside the drivers door...didnt check the relays though
tried the ig on off on off, then hold down lock/unlock multiple times...doesnt work

what am i missing here? how do i get those relays out of the fuse panel?

could it be the switch in the drivers side door?

thanks in advance
 
If they both were dead you might need to go to the dealer and have them reprogramed
:( Mine turned out to be a bad BCM.
 
Did you follow the instructions on the inside of the fob? IIRC you're supposed to hold lock and unlock for 7 seconds, or something.

If that doesn't work, you need to have them re-programmed with a Tech II.
 
Back
Top