Harmonics

[Husker6.5]

Now, that said, you MUST reuse the steel mount clamshells as the poly mounts are just inserts. Then the debate is to bolt the halves back together or to spot weld them. If you have good welding skills, I'd go the spot weld route.

 

[Hink]

Now, that said, you MUST reuse the steel mount clamshells as the poly mounts are just inserts. Then the debate is to bolt the halves back together or to spot weld them. If you have good welding skills, I'd go the spot weld route.

Here's a short video I put together showing how I installed the inserts...

 

[Burning oil]

I have the ES mounts in stock, but not on the site yet. Email if you need a set.

 

[Burning oil]

Mounts http://leroydiesel.com/products/energy-suspension-engine-mount/

Cooling system http://leroydiesel.com/products/balanced-flow-cooling-system/

BRF http://leroydiesel.com/products/bypass-restrictor-fitting-brf/

 

[n8in8or]

Mounts http://leroydiesel.com/products/energy-suspension-engine-mount/

Cooling system http://leroydiesel.com/products/balanced-flow-cooling-system/

BRF http://leroydiesel.com/products/bypass-restrictor-fitting-brf/

A kit of cooling upgrade parts. That will be handy for 6.5 newbies. Good idea.